We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
DeShi rubber slurry pump, the wet elements are created of anti-abrasive or anti-corrosive organic rubber, which
can be flawlessly interchangeable with the steel parts. Clients can choose distinct content elements according
to the slurry liquid circumstances, such as R08, R26, R33, R55, S31, S42, S45, etc. Rubber lined slurry pumps
are more ideal in delivering high corrosive or abrasive slurries of little particle dimension with out difficult
or sharp edges.
Slurry Pump Parameters
Design | Max Electrical power (Kw) |
Inlet & Outlet dimension (inch) | Material for Use Areas | Stream Fee (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | 15 | 1.5/one | M | twelve.6~28.8 | 3.5~8 | 6~68 | 1200~3800 | 152 |
R | 10.8~twenty five.two | 3~seven | seven~52 | 1400~3400 | 152 | |||
40HS-B | 15 | 2/1.five | M | 32.4~seventy two | 9~20 | 6~fifty eight | 1200~3200 | 184 |
R | 25.2~fifty four | seven~fifteen | 5.5~41 | one thousand~2600 | 178 | |||
50HS-C | 30 | 3/two | M | 39.6~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
R | 36~seventy five.six | 10~21 | 13~46 | 1300~2300 | 213 | |||
75HS-C | 30 | 4/3 | M | 86.4~198 | 24~55 | 9~52 | 1000~2200 | 245 |
R | 79.2~180 | 22~fifty | five~34.5 | 800~1800 | 245 | |||
100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
R | 144~324 | forty~90 | twelve~forty five | 800~1350 | 365 | |||
150HS-E | 120 | 8/six | M | 360~828 | 100~230 | ten~sixty one | five hundred~1140 | 510 |
R | 324~720 | ninety~200 | seven~49 | 400~one thousand | 510 | |||
200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | eleven~61 | 400~850 | 686 |
R | 540~1188 | 150~330 | twelve~fifty | 400~750 | 686 | |||
250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
R | 720~1620 | 200~450 | 7~forty five | three hundred~650 | 762 | |||
300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | 13~63 | three hundred~600 | 965 |
R | 1152~2520 | 320~seven-hundred | 13~forty four | three hundred~500 | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | 13~fifty seven | two hundred~400 | 1370 |
25HHS-C | thirty | 1.5/one | M | sixteen.2~34.2 | 4.5~9.five | twenty five~ninety two | 1400~2200 | 330 |
50HHS-D | sixty | 3/2 | M | 68.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | one hundred twenty | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
100HHS-E | a hundred and twenty | 6/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~a thousand | 711 |
150HHS-S | 560 | eight/six | M | 468-1008 | a hundred thirty~280 | twenty~ninety four | five hundred~1000 | 711 |
For the substance of donning components,
“M” = metallic, extremely chromium alloy
“R” = anti-abrasive rubber
In depth Features:
1. EPT designed for interchangeable wet components with metal lined slurry pump.
2. Casing – Casing halves of ca EPT or ductile iron with exterior reinforcing ribs have the use liners and give
large operating force capabilities
three. Bearing assembly – A massive diameter shaft with limited overhang minimizes deflection and contributes to lengthy
bearing existence. Only 4 by means of bolts are required to keep the cartridge variety housing in the frame.
four. Pump frame – A rigid, a single-piece casting cradles the “cartridge” shaft and bearing assembly. A minimum
amount of by means of bolts keep the pump casing to the frame. An simple implies of exterior impeller adjustment
is offered in a handy place under the bearing housing.
five. Impeller – EPT and rear shrouds have pump-out vanes. This design minimizes recirculation and seal
contamination, Elastomer impellers are made from rubber coated higher tensile steel, Solid-in impeller threads
need no impeller insert or nuts.
6. Liners – Rubber elastomer liners are interchangeable with hard steel. The elastomer liners are bolted,
not bonded, to the outer casing. Elastomer seal rings back again all liner joints.
7. Shaft seal – Packing seal,Centrifugal seal, and Mechanical seal.
8. Driving kind – Flexible coupling,V-belt with pulleys,Gearbox,VFD,S EPT control etc.
9. The discharge department can be oriented to any eight positions at the interval of 45 levels
ten. Straightforward to install and preserve in on-website application.
Make contact with
Welcome to speak to us any time for particulars.
Your inquiry will get our prompt focus and response !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic equipment manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the shown substitution areas contained herein are not sponsored, authorized, or manufactured by the OEM.