The group has taken part in the making and revising of ISO/TC100 international chain standard several years in success and hosted the 16th ISO/TC100 International annual meeting in 2004.
Overview
Quick Details
- Applicable Industries:
-
Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, farms, Construction works , Energy & Mining, agricultural machiner
- Model Number:
-
5040-5
EPG GROUP PTO shafts can be used for speeds up to 1000 rpm. The maximum working length of the PTO shafts varies according to the size of the tubes The range of the PTO shafts of RPG GROUP includes 4 series , according to the tube shape
- Product name:
-
Steel Taper Lock Bushing 5040-5
- Bore:
-
5 inch
- Weight:
-
9.90kg
- Keyway:
-
0.750×0.209
Supply Ability
- Supply Ability:
- 10000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- Bubble bag+Carton/Wooden case
- Port
- Tianjin/Shanghai/Qingdao
Online Customization
EPG is specialized in design, manufacturer and sales of agricultural machinery and farm implements, which has an independent import and export rights.
Product Description
No. |
Parameters |
Details |
1 |
Product name |
Steel Taper Lock Bushing 5040-5 |
2 |
Material |
Cast iron,Steel,Stainless steel |
3 |
Match |
Timing pulley,Sprocket,Gear,V-belt pulley |
4 |
Color |
Black, White |
5 |
Surface treatment |
Black(parkerising),White(no parkerising) |
6 |
Shipping |
Express(DHL,Fedex,TNT,EMS,UPS…),By sea, By air |
7 |
Payment |
Trade Assurance,T/T,Western Union,Paypal.. |
8 |
Sample offer |
Free sample available |
Product Pictures
Specification
Install & Remove
To Install
1.Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes (each comeplete hole will be threaded on one side only).
2.Lightly oil thread and point of set screws,or thread and under head of cap screws.Place screws loosely
in holes that are threaded on hub side.
3.Make sure bush is free in hub.Slip assembly onto shaft and locate in the desired position.
4.Tighten screws alternately and evenly until all are pulled up tightly (See table for torque settings).
5.Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage.Screws can
now be turned a little more to the specified torque setting.Repeat this alternate hammering and screw
re-tightening until the specified torque is reached. Fill all holes with gEstablished in 1986, EPG started as a manufacturer of bevel helical gearboxes, parallel shaft gearboxes, shaft-mounted gearboxes and right angle gearboxes. Through the years, the product range has been widened to include new and updated product lines i.e. planetary gearboxes and worm gearboxes.rease to exclude dirt.
To Remove
1.Remove all screws. Lightly oil thread and point of set screws,or thread and under head of cap screws.
2.Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers.
3.Tighten screws alternately until bush is loosened in hub and then remove the complete assembly.
If bush does not loosen immediately, tap on hub.
Packing
Usuallu used the suitable for transport by sea, rail, air, and other suitable for import and export customs clearance of free fumigation wooden box of free fumigation wooden pallets (precision products used the collision coating layer in the packaging box, to ensure the goods safe enough).
Remarks:
All items are checked and tested thoroughly during every working procedure, and after the product is finally manufactured to ensure that the best quality product enter into the market.
Payment & Shipping
Contact