We To develop and test advanced product solutions, EPG Industries relies on its Mechatronics Research Center, established in 1996 and equipped with the latest technologies and experimental tools.EPG is a professional manufacturer and exporter that is concerned with the design, development and production.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Main products include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing film, plough tip and share, cultivator tine, casting parts etc.Our team of professionals is the biggest asset for the organization. They are dexterous and abreast with the latest techniques and trends for manufacturing an impeccable assortment of products. Our clientele is spread across the country and we believe in maintaining it by consistently catering to its demands. We are exporting our products globally. CENTER PIVOT IRRIGATION SYSTEM
PRODUCT INTRODUCTION
The DYP series center pivot irrigation system is made up of center trestle table ,trestle -tower vehicle ,sprinkler truss,endmost ,cantilever ,and synchronous system controlled by electric etc.
The center pivot irrigation system is especially applied in the irrigation of planing potatoes,suXiHu (West Lake) Dis.Hu (West Lake) Dis.canes,watermelons,legumes,economic crops and pasture.The automated irrigation system characterize high in efficiency ,Featuring in high efficiency ,power and water saving ,the irrigator can increase yield at economical cost with the spraying uniformity coefficient up to 85%,and take advantages of the uniform application of chemical and fertilizers .The center pivot irrigation system can also work on uneven fields with sXiHu (West Lake) Dis.Hu (West Lake) Dis.es of up 25%. All parts rust free in 15 years via zinc coating treatment. All running parts shall be operated under the main control system and the fault position shall be displayed when malfunction and /or interrution happens.
River and bore ept can be the water resource of the fixed point, the water transports through main pipes and sprinklers, finally applied to the field. The advantage of this irrigation system is to use less labor and water to irrigate 13-130ha from one water feeding point. Steel structure of special design can satisfy different lengths of the machine. One span with one overhang is the simplest machine you can choose for small land. The heavy duty design can be extend to more than 11 spans (650m) with the angles and bolt pivot anchors strong enough to figeptwindstorm.
SPECIFICATION
| Items |
Specification |
Items |
Specification |
| Pivot length |
41.1-791.2m |
Land covered |
0.53-196.7ha |
| Qty.of spans |
1-16 |
Span length choice |
41.1/47.8/54.4/61.3m |
| Overhang length |
6.7/13.4/20.1/26.8m |
Pivot clearance |
2.91-3.75m |
| Span dia. |
141/168/203mm |
Pivot height |
4.62-5.46m |
| Span thickness |
3mm |
Surface |
Hot dip galvanization |
| Flow rate |
15-1080m3/hr |
Water pressure at pivot base |
1-7.5Bar |
| Friction Loss |
0-2.5bar |
Tire |
Rubber: 320X1260 mm
Plastic: 318X1170 mm |
| Max speed |
142m/hr |
Sprinkler |
Nelson/Senninger |
| Regulator |
10/15psi |
Type of drops |
Flex 5.5-ft drops |
| Gear box |
50:1 heavy duty |
Gear motor |
33rpm(full loaded) at 380V.3/4HP 40:1 Ratio. Over-heating protection |
| Control panel |
StHangZhourd |
Required run power |
0.7-11.5kw |
| Power supply |
380V 415V 50HZ 60HZ |
Irrigation Hours/Day |
0-24hr/day |
| Daily applicationrate |
0-50mm/day |
Pressure gage |
0-60ps |
|
FEATHERS
This center pivot irrigation system can even walk in the waving land.
1 Metallic zinc-coated Spans rubber-band united between itself
2 Mounted on support of intermediate towers-each with two wheels
3 -type, axles drive unit from electric geared motor to Wheels gearboxes
4 Electronic block of the system with equalization and checept
5 Control transformer
6 Monitoring indicators
7 Fuses – 30 amps
8 System monitors
9 Fused disconnect in panel rated 600v at 30 amps
10 Forward / reverse contactors rated 600v at 30 amps
Heavy duty gear box
1 Enhanced casing design, increase intensity, reduce wear and tear
2 Special seal, prevent dist and humidity
3 Large power output bearing, load capacity enhances 55%
4 High-strength cast iron, big gear design
5 Shorten driven wheel design, reduce extra load
6 High-strength caps pre-commitment load
PHOTOS OF IRRIGATION SYSTEM
COMPANY INTRODUCTION
HangZhou Harvest Machinery Co., Ltd is a leading manufacturer in China for irrigation equipments.
The main products of our company include center pivot irrigation system, fixed pivot irrigation system, towable center pivot irrigation system, lateral move irrigation system and small size center pivot irrigation system, and water hose reel irrigation machine.
We strives to provide first-class quality products and friendly service with rich experience of finish machining.
“Good Quality, Reptable Price, Best Service” is our goal. We warmly and sincerely welcome customers all over the ept to visit our factory and look forward to estabXiHu (West Lake) Dis.Hu (West Lake) Dis.ng long term cooperation and solid relationship to make mutual benefit.
For more information, please feel free to contact us.
PACKAGE AND DELIVERY
Spare parts packaged by the stHangZhourd exporting wooden box.
20″, 40″, 40″HQ, 40″ open top, all available.
SERVICE
1. Professional and quick response to your questions within 24 hours.
2. We will communicate with our production dept. and keep you updated about production progress in time.
3. Customized manufacture available for you.
4. Fast delievery to save your time.
5. Good after sale service will eliminate your worry.
6. Long guarantee period of the quality will reduce your cost and trouble.
7. Professional wooden case pacept and ept shipping control to make your order safe and sound.
8. Full sets of technical documents, instruction manual can be provided.
PAYMENT bush hog 2510 gearbox Gomel Belarus
Wire transfer: 30% advance by T/T, 70% balance by T/T before shipment.
Letter of credit: by irrevocable letter of credit at sight.
Western union: it is a fast and safe way.
ept TERM
We can do FOB, C&F and CIF for your choice.
CONTACT
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
