We – EPG Team the largest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
–Pushed (outer) yoke same as push yoke but is mounted on the employ. There are two kinds of shafts, domestic and metric, which are identifiable by their designs. Domestic are typically a single of four designs: round, square, rectangle or splined. Metric are: bell, star or soccer shaped. In either scenario the principal (entrance) shaft is the exact same form as the secondary shaft, only greater so that the secondary shaft suits inside. This enables a telescoping influence to take spot when the apply is elevated on the three pt. or for the duration of a turning movement this kind of as a bailer. All shafts have to be sized just before use. Attach the apply to the three pt. and increase and support it. Connect the appropriate finish to the tractor and endeavor to connect the other to the employ. If the shaft is way too long trim one of the shafts with a hack saw and consider it yet again till it matches. This enables for the implement to be raised without binding. The shafts ought to overlap as a lot as authorized. Incorporating a 2nd motor merely is not practical, which makes energy just take off (PTO) a worthwhile factor in supplying power to secondary capabilities. To understand their worth calls for a better comprehension of these methods, their numerous types, and their a variety of apps. john deere pto adapter Our john deere 4020 pto shaft seal organization pto yoke pins is bush hog 2615 legend gearbox found jeep jk front travel shaft in one 3/four 6 spline pto shaft XiHu pto shaft spring pin HangZhou 2007 lincoln mkz travel shaft Zhejiang pto drive shaft for auger Province. 2007 hummer h3 entrance drive shaft T “EPG” brand rotocultivator ploughshares in T.S. complete traces developed in our manufacturing unit have been analyzed and appraised by the Ministry of Agriculture and have received the license of popularizing farm machinery promulgated by the Ministry of Agriculture of the People’s Republic of China.
Backyard Instruments three Point Flail Mower Garden Mower For Tractor
Flail mower provide an effective solution for the handle of excessive expansion. PTO flail mower, also identified as mulching mowers, are developed to mow and shred concurrently. The shredded materiall acts as an powerful mulch, to retard ensuing growth even though supplying a medium that will much better launch nutrients into the soil.
Raise Responsibility Flail Mower | ||||||||||
Design | EF85 | EF95 | EF105 | EF115 | EF125 | EF135 | EF145 | EF155 | EF165 | EF175 |
Construction excess weight(kg) | a hundred | one hundred fifteen | a hundred thirty | 145 | a hundred and sixty | one hundred seventy five | a hundred ninety | 210 | 235 | 255 |
Slicing width(mm) | 829 | 929 | 1029 | 1129 | 1229 | 1329 | 1429 | 1529 | 1629 | 1729 |
PTO speed | 540r/min | |||||||||
Flail variety | Y blade / Hammer | |||||||||
Number of flails | thirty | thirty | 36 | 42 | 42 | forty eight | 54 | 54 | 54 | 60 |
Tractor HP | fourteen-18 | sixteen-twenty | twenty-thirty | 20-thirty | twenty five-35 | twenty five-35 | 25-35 | thirty-forty | 30-forty | thirty-forty |
Middle Duty Flail Mower | ||||||||||
Design | EFG105 | EFG115 | EFG125 | EFG135 | EFG145 | EFG155 | EFG165 | EFG175 | ||
Construction bodyweight(kg) | 230 | 245 | 257 | 272 | 287 | 302 | 317 | 329 | ||
Cutting width(mm) | 1020 | 1120 | 1220 | 1320 | 1420 | 1520 | 1620 | 1720 | ||
PTO pace | 540r/min | |||||||||
Flail variety | Y blade / Hammer | |||||||||
Variety of flails | Y blade:32 Hammer:16 |
Y blade:forty Hammer:twenty |
Y balde:forty Hammer:20 |
Y blade:forty eight Hammer:24 |
Y balde:forty eight Hammer:24 |
Y blade:forty eight Hammer:24 |
Y blade:56 Hammer:28 |
Y balde:fifty six Hammer:28 |
||
Tractor HP | fifteen-twenty | fifteen-twenty | 15-20 | eighteen-twenty five | twenty-thirty | twenty-thirty | twenty five-35 | thirty-35 |
Center Duty Flail Mower | |||||||||||
Product | EFGC105 | EFGC115 | EFGC125 | EFGC135 | EFGC145 | EFGC155 | EFGC165 | EFGC175 | EFGC185 | ||
Construction excess weight(kg) | 250 | 265 | 277 | 292 | 317 | 322 | 347 | 359 | 385 | ||
Chopping width(mm) | 1020 | 1120 | 1220 | 1320 | 1420 | 1520 | 1620 | 1720 | 1820 | ||
PTO speed | 540r/min | ||||||||||
Flail variety | Y blade / Hammer | ||||||||||
Amount of flails | Y blade:32 Hammer:sixteen |
Y balde:40 Hammer:20 |
Y balde:forty Hammer:20 |
Y balde:48 Hammer:24 |
Y blade:forty eight Hammer:24 |
Y blade:48 Hammer:24 |
Y blade:56 Hammer:28 |
Y blade:fifty six Hammer:28 |
Y blade:sixty four Hammer:32 |
||
Tractor HP | 18-25 | 18-twenty five | eighteen-25 | twenty-thirty | 20-30 | 30-40 | 35-45 | 40-fifty | 45-85 |
Hefty Responsibility Flail Mower | |||||||||||
Design | EFGCH105 | EFGCH115 | EFGCH125 | EFGCH135 | EFGCH145 | EFGCH155 | EFGCH165 | EFGCH175 | EFGCH185 | ||
Construction weight(kg) | 285 | three hundred | 312 | 327 | 352 | 332 | 347 | 359 | 385 | ||
Reducing width(mm) | 1020 | 1120 | 1220 | 1320 | 1420 | 1520 | 1620 | 1720 | 1820 | ||
PTO pace | 540r/min | ||||||||||
Flail variety | Y blade / Hammer | ||||||||||
Number of flails | Y blade:32 Hammer:16 |
Y balde:40 Hammer:20 |
Y balde:40 Hammer:20 |
Y balde:forty eight Hammer:24 |
Y blade:forty eight Hammer:24 |
Y blade:forty eight Hammer:24 |
Y blade:56 Hammer:28 |
Y blade:56 Hammer:28 |
Y blade:sixty four Hammer:32 |
||
Tractor HP | 18-28 | 18-28 | twenty-28 | twenty five-35 | twenty five-35 | 30-forty | 35-fifty five | 35-fifty five | 35-fifty five |
Middle Obligation Bush Cutter | |||||||||||
Model | AG140 | AG170 | AG200 | AG220 | |||||||
Composition excess weight(kg) | 320 | 390 | 430 | 480 | |||||||
Slicing width(mm) | 1380 | 1680 | 1980 | 2180 | |||||||
PTO speed | 540r/min | ||||||||||
Flail type | Hammer | ||||||||||
Number of flails | twelve | 19 | 18 | twenty | |||||||
Tractor HP | 35-forty five | 40-50 | forty five-sixty | fifty five-eighty five |
Large Duty Bush Cutter | |||||
Design | AGF140 | AGF160 | AGF180 | AGF200 | AGF220 |
Dimension(mm) | 1800x2225x1020 | 2000x2225x1020 | 2200x2225x1020 | 2400x2225x1020 | 2600x2225x1020 |
Composition fat(kg) | 598 | 612 | 658 | 698 | 738 |
Cutting width(mm) | 1400 | 1600 | 1800 | 2000 | 2200 |
PTO pace | 540r/min | ||||
PTO spline | 6x8x1600mm | ||||
Tractor HP | 40-85 | 50-85 | 55-90 | fifty five-90 | 50-90 |
Heavy Responsibility Bush Cutter | |||||
Product | AGFK140 | AGFK160 | AGFK180 | AGFK200 | AGFK220 |
Cutting width(mm) | 1400 | 1600 | 1800 | 2000 | 2200 |
Achieve angle up | 90° | ||||
Get to angle down | 55° | ||||
PTO | 540r/min | ||||
Tractor HP | thirty-forty | 40-60 | fifty-70 | sixty-90 |
Mild Responsibility Bush Cutter | |||
Model | AGL120 | AGL145 | AGL165 |
Structure excess weight(kg) | 250 | 280 | 315 |
Tilt-up angle | 90° | ||
Tilt-down angle | 55° | ||
Chopping width(mm) | 1200 | 1400 | 1600 |
Flail variety | Y blade / Hammer | ||
Number of flails | Hammer:20/Y blade:40 | Hammer:24/Y blade:forty eight | Hammer:28 |
PTO speed | 540r/min | ||
Tractor | twenty-40 | thirty-45 | 40-fifty |
Hefty Duty Flail Mower | ||||
Design | AGH140 | AGH160 | AGH180 | AGH200 |
Proportions(LxWxH) | 1800x1850x1020mm | 1820x2050x1020mm | 1800x2250x1020mm | 1820x2450x1020mm |
Framework weight(kg) | 564 | 590 | 618 | 648 |
Slicing width(mm) | 1400 | 1600 | 1800 | 2000 |
Functioning effectiveness | 6000-160000m²/h | |||
PTO pace | 540r/min | |||
PTO spline | 6x8x1600mm | |||
Tractor HP | forty-85 | fifty-ninety | sixty-90 | sixty five-100 |
ATV Ending Mower | ||
Design | ATFM120 | ATFM150 |
Functioning width(mm) | 1200 | 1500 |
Framework weight(kg) | 210 | 250 |
PTO velocity | 540r/min | |
No. of blades | 6 | six |
Electric commence | Yes | Yes |
Engine HP | 16HP (LONCIN) |
Finishing Mower | |||
Model | FMH120 | FMH150 | FMH180 |
Cutting width(mm) | 1200 | 1500 | 1800 |
Oil flow | 30L/min | ||
Motor | 30cc | ||
Doing work force | 20Mpa | ||
Blade No. | 3pcs | ||
Weight(kg) | 242 | 271 | 295 |
Flail Collector | ||
Product | FCN120 | FCN160 |
Stucture bodyweight(kg) | 323 | 367 |
Functioning width(mm) | 1150 | 1550 |
Capability | .55m³ | .7m³ |
PTO pace | 540r/min | |
Flail type | Y blade | |
No. of flails | fifty six | seventy two |
Tractor HP | 20-forty | 28-fifty |
Weighty Responsibility Flail Mower | |||||||
Product | KDK170 | KDK180 | KDK190 | KDK200 | KDK210 | KDK220 | KDK240 |
Dimension(mm) | 1700x915x580 | 1800x915x580 | 1900x915x580 | 2000x915x580 | 2100x915x580 | 2200x915x580 | 2280x915x580 |
Construction fat(kg) | 450 | 470 | 490 | 510 | 525 | 540 | 560 |
Chopping width(mm) | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2400 |
No. of hammers | 28 | 28 | 28 | 32 | 32 | 38 | 38 |
PTO speed | 540r/min | ||||||
PTO spline | 6x8x1600mm | ||||||
Tractor HP | forty five-sixty five | 55-90 | sixty-90 | 70-a hundred | 70-one hundred | eighty-a hundred and twenty | eighty-a hundred and twenty |
Leading Mower | ||||
Design | TM110 | TM140 | TM160 | TM170 |
Framework fat(kg) | 175 | 205 | 215 | 225 |
Cutting bodyweight(mm) | 1060 | 1360 | 1560 | 1660 |
Equipment Box | 40hp | |||
PTO speed | 540r/min | |||
Tractor HP | 18-25 | 20-35 | twenty five-forty | 30-50 |
Weighty Obligation Flail Mower | |||||||
Design | TOL105 | TOL115 | TOL125 | TOL135 | TOL145 | TOL155 | TOL165 |
Slicing width(mm) | 1050 | 1150 | 1250 | 1350 | 1450 | 1550 | 1650 |
Get to angle up | 90° | ||||||
Attain angle down | 55° | ||||||
PTO | 540r/min | ||||||
Tractor HP | 18-twenty five | twenty five-45 | 35-65 |
Weighty Duty Flail Mower | |||
Design | TOS185 | TOS205 | TOS225 |
Slicing width(mm) | 1850 | 2050 | 2250 |
Get to angle up | 90° | ||
Get to angle down | 55° | ||
PTO | 540r/min | ||
Tractor HP | 55-85 |
Best Mower | ||||
Product | DS4FT | DS5FT | DS6FT | DS7FT |
Dimension(mm) | 1320x1220x980 | 1624x1524x980 | 1929x1829x980 | 2234x2134x980 |
Framework bodyweight(kg) | 170 | 220 | 240 | 260 |
Cutting width(mm) | 1180 | 1484 | 1789 | 2094 |
Doing work performance | 3500-9500m²/h | 4400-12000m²/h | 5300-14000m²/h | 6200-16700m²/h |
PTO velocity | 540r/min | |||
PTO spline | 6x8x1000mm | |||
Tractor HP | 20-35 | twenty five-forty | forty-70 | 60-100 |
Tractor Trimmer | |
Product | TS80 |
Doing work width | 800mm |
Blade | x2 |
Hydraulic motor | 25cc(created-in stress limiter) |
Oil circulation | At least 30L/min |
Tractor | twenty five-35HP |
Packing measurement | 1600x950x500mm |
Excess weight | 197kg |
Q: Are you manufacturing facility or buying and selling company?
A) We are ISO9001 accredited manufacturing unit, mostly manufacture in Forestry & Farm Machinery.
B) Employing “Self-made Self-advertising” organization, minimizing the expense of intermediate back links.
Q: What’s your business advantages?
A) As the leading maker of forest machines, we have exported to European marketplace for far more than 10 several years, acquainted with forest and farm marketplace and can suggest to clientele correct merchandise.
B) We have numerous merchandise and can offer you all the machines and tools in the forest and farm. You can get all the items you need to have. Effortless and convenient for you.
C) With us your income and your enterprise is secure. We can offer 7-days refund in case of undesirable top quality.
D) Coming jointly is a beginning trying to keep collectively is development doing work with each other is success.
Q: Can we acquire one particular sample?
Sure, we want to incorporate sample fee to the value and will return it back to your right after obtaining your large buy in future.
Q: What is actually your shipping and delivery time?
Right after obtaining your payment, we begin to make your buy. It normally normally takes about fifteen-forty five days depending on the merchandise you buy.
Q: How do you control your good quality?
To assure large quality and efficient management, we have handed ISO9001 good quality administration program certification. All of our items are one hundred% inspected ahead of shipment. Our total producing procedures are under a extremely severe and rigid technique in our business.
Q: What is actually your item warranty?
The guarantee time of the equipment is 1 12 months. For the duration of this time period, we will send out you the substitute for the damaged portion(not guy manufactured).
To fulfill the every need of consumer is our aim. We are standing by for any issue of consumer. We consider to make our service fast, efficient and content.
Q: What’s your firm mainly exporting marketplace?
We largely export to European, North American, Australia, English and Southeast Asia Market place. Due to the fact of very good good quality and support, we have build very good and long business relations with several customers. Welcome customers from all in excess of the globe to visit our manufacturing unit.
The use of first equipment manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the outlined substitute parts contained herein are not sponsored, authorized, or made by the OEM.